Deep Clean: Intensive vinyl and woven fabric cleaner
Deep Clean is the ultimate awning or fabric cleaner suited for vinyl and woven fabrics!
Deep Clean is an incredible cleaner that is highly concentrated and can be adjusted for the strength that you need! The superior technology behind this solution allows it to clean while not pulling color from inked awnings. It is used and recommended by industry professionals and awning manufacturers alike!
Using Deep Clean will not void manufacturer warranties.
Awning Armor:
Protectant for Vinyl Awnings and Vinyl Fabrics!
Awning Armor uses the latest technology to provide protection, extend the life and renew the vitality of vinyl awnings and fabrics. It is not just another coating or polish that will wash off during routine cleaning!
Awning Armor is formulated to penetrate into the vinyl and bond to it for a more cohesive and lustrous finish. It will restore suppleness, color, and reintroduce lost plasticizer. It also provides excellent UV protection!
Awning Armor has been tested and approved by industry professionals and awning manufacturers and will not void manufacturing warranties!
Awning Cleaner and Protectant:
One-Step Vinyl Maintenance System for Regularly Maintained Awnings!
Cleaner and Protectant is our one-step maintenance system for light to moderately soiled vinyl fabric.
The Cleaner and Protectant cleaning system saves time and money when used as part of a regular vinyl maintenance schedule! This solution cleans, restores shine, provides UV protection and reintroduces lost plasticizer in a vinyl awning.
Cleaner and Protectant is used and approved by vinyl manufacturers and will not void the manufacturer's warranty!
Deep Clean is the ultimate awning or fabric cleaner suited for vinyl and woven fabrics!
Deep Clean is an incredible cleaner that is highly concentrated and can be adjusted for the strength that you need! The superior technology behind this solution allows it to clean while not pulling color from inked awnings. It is used and recommended by industry professionals and awning manufacturers alike!
Using Deep Clean will not void manufacturer warranties.
Awning Armor:
Protectant for Vinyl Awnings and Vinyl Fabrics!
Awning Armor uses the latest technology to provide protection, extend the life and renew the vitality of vinyl awnings and fabrics. It is not just another coating or polish that will wash off during routine cleaning!
Awning Armor is formulated to penetrate into the vinyl and bond to it for a more cohesive and lustrous finish. It will restore suppleness, color, and reintroduce lost plasticizer. It also provides excellent UV protection!
Awning Armor has been tested and approved by industry professionals and awning manufacturers and will not void manufacturing warranties!
Awning Cleaner and Protectant:
One-Step Vinyl Maintenance System for Regularly Maintained Awnings!
Cleaner and Protectant is our one-step maintenance system for light to moderately soiled vinyl fabric.
The Cleaner and Protectant cleaning system saves time and money when used as part of a regular vinyl maintenance schedule! This solution cleans, restores shine, provides UV protection and reintroduces lost plasticizer in a vinyl awning.
Cleaner and Protectant is used and approved by vinyl manufacturers and will not void the manufacturer's warranty!
Deep Clean:
Using the WINSOL maintenance system with an awning maintenance pole:
Insert pick-up tube into the WINSOL Deep Clean container. Turn water valve to the “on” position and adjust the metering valve to optimum cleaning level (refer to manufacturer’s recommendations to start). Clean each awning from the bottom to the top for best results and to prevent streaking. Turn metering valve off and use the clear water to rinse. Always rinse immediately to avoid streaking.
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Hand Cleaning:
Mix 8 ounces of Deep Clean into 1 gallon of water. Using a brush of medium stiffness or an awning sponge, gently but firmly scrub awning from the bottomto top. Rinse immediately with clear water.
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Foam Generating Systems:
Mix 2 to 4 ounces of Deep Clean per gallon of water in the holding tank. Lay out foam in an even pattern using brush to spread the foam. Allow to stand on awning surface for 3 to 5 minutes. Scrub with brush as required and rinse.
Recommended after care:
Awning Armor:
Each gallon should cover 700-1000 square feet
1. Clean the surface with WINSOL Deep Clean awning cleaner or WINSOL Awning Cleaner and Protectant. Surface should be clean and free of dirt or dust.
2. Dilute with equal parts of water.
3. Spray or wipe on a small amount of Awning Armor directly on the awning surface. Avoid allowing overspray to reach any other surface. Do not overuse. Spread Awning Armor over the entire area with a soft, clean cloth. Buff in gently in a circular motion, turning the cloth often. Applicator may be dipped into a bucket and carefully wrung out to avoid over-application or dripping.
4. Reapply as needed. Frequent applications will restore much of the original suppleness and shine to vinyl awnings.
WINSOL Awning Armor is wash resistant when dry. Clean awnings often to maintain their beauty and strength as well as to help maintain manufacturer’s warranties. Reapply Awning Armor as often as needed.
Awning Cleaner and Protectant:
Dilution Ratio: Mix 8 ounces of Awning Cleaner and Protectant into 1 gallon of water.
Using the WINSOL maintenance system with an awning maintenance pole:
Insert pick-up tube into Awing Cleaner and Protectant container. Turn water valve to the “on” position and adjust the metering valve to optimum cleaning level (refer to manufacturer’s recommendations to start). Clean each awning from the bottom to the top for best results and to prevent streaking. Turn metering valve off and use the clear water to rinse. Always rinse immediately to avoid streaking.
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Hand Cleaning:
Mix 8 ounces of Awning Cleaner and Protectant into 1 gallon of water. Using a brush of medium stiffness or an awning sponge, gently but firmly scrub awning from bottom to top. Rinse immediately with clear water.
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
*For neglected or damaged awnings, use WINSOL’s Deep Clean and Awning Armor to restore appearance. For regular maintenance, use the Awning Cleaner and Protectant
Using the WINSOL maintenance system with an awning maintenance pole:
Insert pick-up tube into the WINSOL Deep Clean container. Turn water valve to the “on” position and adjust the metering valve to optimum cleaning level (refer to manufacturer’s recommendations to start). Clean each awning from the bottom to the top for best results and to prevent streaking. Turn metering valve off and use the clear water to rinse. Always rinse immediately to avoid streaking.
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Hand Cleaning:
Mix 8 ounces of Deep Clean into 1 gallon of water. Using a brush of medium stiffness or an awning sponge, gently but firmly scrub awning from the bottomto top. Rinse immediately with clear water.
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Foam Generating Systems:
Mix 2 to 4 ounces of Deep Clean per gallon of water in the holding tank. Lay out foam in an even pattern using brush to spread the foam. Allow to stand on awning surface for 3 to 5 minutes. Scrub with brush as required and rinse.
Recommended after care:
Awning Armor:
Each gallon should cover 700-1000 square feet
1. Clean the surface with WINSOL Deep Clean awning cleaner or WINSOL Awning Cleaner and Protectant. Surface should be clean and free of dirt or dust.
2. Dilute with equal parts of water.
3. Spray or wipe on a small amount of Awning Armor directly on the awning surface. Avoid allowing overspray to reach any other surface. Do not overuse. Spread Awning Armor over the entire area with a soft, clean cloth. Buff in gently in a circular motion, turning the cloth often. Applicator may be dipped into a bucket and carefully wrung out to avoid over-application or dripping.
4. Reapply as needed. Frequent applications will restore much of the original suppleness and shine to vinyl awnings.
WINSOL Awning Armor is wash resistant when dry. Clean awnings often to maintain their beauty and strength as well as to help maintain manufacturer’s warranties. Reapply Awning Armor as often as needed.
Awning Cleaner and Protectant:
Dilution Ratio: Mix 8 ounces of Awning Cleaner and Protectant into 1 gallon of water.
Using the WINSOL maintenance system with an awning maintenance pole:
Insert pick-up tube into Awing Cleaner and Protectant container. Turn water valve to the “on” position and adjust the metering valve to optimum cleaning level (refer to manufacturer’s recommendations to start). Clean each awning from the bottom to the top for best results and to prevent streaking. Turn metering valve off and use the clear water to rinse. Always rinse immediately to avoid streaking.
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Hand Cleaning:
Mix 8 ounces of Awning Cleaner and Protectant into 1 gallon of water. Using a brush of medium stiffness or an awning sponge, gently but firmly scrub awning from bottom to top. Rinse immediately with clear water.
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
*For neglected or damaged awnings, use WINSOL’s Deep Clean and Awning Armor to restore appearance. For regular maintenance, use the Awning Cleaner and Protectant
Link to SDS Database: SDS Database
This video provides an excellent demonstration of how to use Deep Clean!
This video is hosted by our distributor J.Racenstein Co and created by J&J Window Cleaning Services.