Steam Cleaning Carpet and Upholstery Concentrate
Only 2 ounces of Aqua-terge 900 makes 500 gallons of powerful, yet gentle emulsifying steam cleaner. Built for all types of truck mounted and portable machines, Aqua-terge 900 uses pH balanced emulsifiers to deliver a very low foaming alternative to powders. Quick and easy adjustments are just one of the benefits available from a liquid concentrate! This formula is safe for any fabric or fiber including new generation stain resistant carpets. AT 900 is the product of choice for all professionals who prefer a liquid steam emulsifier.
Mix 2-4 ounces of AQUA-TERGE 900 with 5 gallons of hot or cold water. If extractor is adjustable, set meter to lower quarter. Most machines will have to be set very low. If the metered AQUA-TERGE solution is still too rich at your lowest setting, dilute, again with an equal part of water. Repeat adjustments until optimum cleaning results are obtained.
TRUCK MOUNTED EXTRACTORS:
To make a working concentrate: Add 1 quart of AQUA-TERGE 900 to 5 gallons of warm water. Adjust flow meter to the lower quarter of the range and test the cleaning ability. One quart should make approximately 450 gallons of working solution. Adjust meter until satisfied with cleaning results.
Hydraforce, high pressure: Add 12 ounces per gallon of water.
Hydraforce, low pressure: Add 8 ounces per gallon of water.
Always remove any remaining solution from equipment, clean and flush complete system with clear water. AQUA-TERGE 900 contains no harsh chemicals or alkalis which may leave deposits in your expensive equipment. AQUA-TERGE 900 is biodegradable and environmentally safe.