Aluma wash - gallon
SKU:
6329g
$24.95
$24.95
per item
Aluma Wash is specifically formulated for high tech aluminum floors, building facings, window frames, platforms, workstations and walls.
Aluma Wash not only cuts through airborne pollution including hydrocarbons, accumulated traffic lanes, finger prints and tracked-in soils but it also contains special inhibitors that help to prevent corrosion or aluminum blush!
Aluma Wash may be used in any application requiring heavy duty cleaning and rapid degreasing of floors, tables, tools and more!For floor mopping, wring mop thoroughly to prevent seepage through raised flooring over electrical or air conditioning conduits. Rinse with a clean, damp mop
Aluma Wash not only cuts through airborne pollution including hydrocarbons, accumulated traffic lanes, finger prints and tracked-in soils but it also contains special inhibitors that help to prevent corrosion or aluminum blush!
Aluma Wash may be used in any application requiring heavy duty cleaning and rapid degreasing of floors, tables, tools and more!For floor mopping, wring mop thoroughly to prevent seepage through raised flooring over electrical or air conditioning conduits. Rinse with a clean, damp mop
Note: For the aluminum inhibitors to function properly, Aluma Wash must be diluted at least 1:4. Do not use straight.
Aluma Wash may be diluted with water from 1:32 to 1:16 as the usual range. A good starting dilution is 1:32 in hot or cold water. Apply solution directly to floors with a damp string mop or sponge mop. For external building surfaces, dilute about 1:8 and apply with a white pad, scrub in and rinse. Squeegee dry where necessary, especially windows affected by overspray during cleaning.
To avoid electrical shock or air flow contamination, avoid allowing moisture to penetrate between joints or down air vents. Scrub area briskly until all traces of soils and marks have vanished. Rinse carefully and repeat only if necessary.
For hand cleaning: Mix about 1 ounce to 32 ounces of water in a spray or pour top bottle. Apply solution to cleaning cloth and scrub lightly or until soil is gone. Solution may be sprayed directly on seamless surfaces if there is no risk of getting moisture into electrical conduits or air conditioning vents below the surface.
Aluma Wash may be diluted with water from 1:32 to 1:16 as the usual range. A good starting dilution is 1:32 in hot or cold water. Apply solution directly to floors with a damp string mop or sponge mop. For external building surfaces, dilute about 1:8 and apply with a white pad, scrub in and rinse. Squeegee dry where necessary, especially windows affected by overspray during cleaning.
To avoid electrical shock or air flow contamination, avoid allowing moisture to penetrate between joints or down air vents. Scrub area briskly until all traces of soils and marks have vanished. Rinse carefully and repeat only if necessary.
For hand cleaning: Mix about 1 ounce to 32 ounces of water in a spray or pour top bottle. Apply solution to cleaning cloth and scrub lightly or until soil is gone. Solution may be sprayed directly on seamless surfaces if there is no risk of getting moisture into electrical conduits or air conditioning vents below the surface.
Link to SDS Database: SDS Database