Polyclean - 5 gallon pail
SKU:
6045p
$272.25
$272.25
per item
PolyClean is formulated to be a non-abrasive cleaner for Plexiglas®, Lexan® and polycarbonate indoors or outdoors!
Polyclean removes paint, tar, graffiti, etc from polycarbonates and many types of awnings! It is a safer but effective blend of water soluble solvents, surfactants and sequestriants which, when used according to instructions, will provide optimum cleaning power to plate Plexiglas® and Lexan®.
Polyclean removes lacquer, enamel, permanent marker and several types of graffiti. It softens and dissolves abraded plastic residues, inks, waxes and resins.
It eliminates grease, grime, tar, smoke, and rubber residues without abrasion of the surface material.
Polyclean removes paint, tar, graffiti, etc from polycarbonates and many types of awnings! It is a safer but effective blend of water soluble solvents, surfactants and sequestriants which, when used according to instructions, will provide optimum cleaning power to plate Plexiglas® and Lexan®.
Polyclean removes lacquer, enamel, permanent marker and several types of graffiti. It softens and dissolves abraded plastic residues, inks, waxes and resins.
It eliminates grease, grime, tar, smoke, and rubber residues without abrasion of the surface material.
Sold out
Rubber gloves are recommended to prevent dry skin.
RINSE WELL WITH FRESH WATER AFTER EACH CLEANING.
NOTE: It is always recommended that all surfaces be tested with POLYCLEAN before attempting to clean the entire surface. Do no use on styrene or acetates. Refer to the SDS before using this product.DO NOT use on residential skylights or molded, stressed, pre-formed or curved windows or skylights
WINDOWS:
Polyclean may be wiped on any soiled surface with a soft, clean and lint free cloth and rubbed gently onto the surface of the glass in small circular motions. Continue to rub until all the marks have been removed. Change the cloth surface frequently to avoid scratching. If plexiglass appears somewhat hazy, reapply until the glass is clear once more. Rinse well with fresh water after each cleaning.
METAL PARTS, POLYPROPYLENE AND EQUIPMENT:
Parts, polypropylene surfaces, environmental surfaces and equipment may be cleaned in the same fashion as with windows. Metal parts may be cleaned in a cold dip tank system. Rinse well with fresh water after each cleaning.
RINSE WELL WITH FRESH WATER AFTER EACH CLEANING.
NOTE: It is always recommended that all surfaces be tested with POLYCLEAN before attempting to clean the entire surface. Do no use on styrene or acetates. Refer to the SDS before using this product.DO NOT use on residential skylights or molded, stressed, pre-formed or curved windows or skylights
WINDOWS:
Polyclean may be wiped on any soiled surface with a soft, clean and lint free cloth and rubbed gently onto the surface of the glass in small circular motions. Continue to rub until all the marks have been removed. Change the cloth surface frequently to avoid scratching. If plexiglass appears somewhat hazy, reapply until the glass is clear once more. Rinse well with fresh water after each cleaning.
METAL PARTS, POLYPROPYLENE AND EQUIPMENT:
Parts, polypropylene surfaces, environmental surfaces and equipment may be cleaned in the same fashion as with windows. Metal parts may be cleaned in a cold dip tank system. Rinse well with fresh water after each cleaning.
Link to SDS Database: SDS Database